To Next PageTo Next Page
Need help?Do you have a question about the General Pipe Cleaners Mini-Rooter XP and is the answer not in the manual?
Highlights the machine's design for profitable service and the operator's role.
Emphasizes reading, understanding, and saving safety warnings and instructions.
Mandates reading the operator's manual and following instructions to prevent injury or death.
Explains the safety alert symbol and its purpose in warning of potential hazards.
Warns about shock risk from improperly wired outlets and the importance of ground fault circuit interrupters.
Recommends wearing leather gloves, safety glasses, and non-slip shoes.
Guidelines for maintaining a clean work area and ensuring electrical safety with grounded tools and cords.
Advice on staying alert, dressing properly, avoiding accidents, and using tools correctly.
Instructions on caring for tools, checking for damage, and the importance of qualified repair personnel.
Rules for handling cables, operating the machine, and avoiding entanglement or injury.
Details on the GFCI's function, testing procedure, and what to do if it malfunctions.
Identifies major components of the Mini-Rooter XP, including the feed system and controls.
Instructions on positioning the machine, foot pedal, and selecting the correct cutting tool.
Detailed steps for pulling cable, engaging the feed, and controlling the cable's direction and speed.
Reference tables for matching cable sizes and cutters to different pipe types and blockages.
Guidance on feeding cable, managing slack, using reverse, and avoiding damage.
Procedure for safely freeing a cable that gets caught in the line using reverse operation.
Methods for untangling cables in the drum, including proper usage to prevent tangling.
Step-by-step instructions for removing and installing the drum assembly from the machine.
Procedures for loading 3/8", 1/2", 1/4", and 5/16" cables into standard and optional drums.
Instructions for utilizing specialized drums for different cable types and applications.
Best practices for cleaning, oiling, and maintaining cables for longevity and performance.
Guidance on cleaning the feed system, addressing dirt accumulation, and replacing worn parts.
Detailed steps for replacing the feed roller assembly, including component alignment.
Solutions for cable kinks, breaks, tangles, and drum rotation issues.
Troubleshooting guide for feed failures, GFCI trips, and motor operation problems.
List of part numbers for the machine's structural, drum, and drive system components.
List of part numbers for the motor, power cable feed, switches, and feed roller assemblies.
List of part numbers for various cable types, optional drums, and other accessories.
Detailed diagram of the PO-XP Power Cable Feed system with component labeling.
Detailed diagrams of the main machine unit and its rear view with component labeling.
Contact details for General Wire Spring Co., including address and website.
General| Model | Mini-Rooter XP |
|---|---|
| Power Source | Electric |
| Cable Diameter | 5/16", 3/8" |
| Drum Capacity | 50 ft of 5/16" or 35 ft of 3/8" Flexicore® cable |
| Cable Capacity | 50 ft. x 5/16", 35 ft. x 3/8" |
