Need help?Do you have a question about the General 350 MI and is the answer not in the manual?
Details coverage for defects in workmanship or material.
Covers products for commercial, industrial, and educational use.
Procedures and requirements for submitting a claim.
Proper wiring, grounding, and plug types for safe operation.
Ensuring circuit capacity and selecting appropriate extension cords.
Procedures for unpacking the saw and verifying included items.
Tools and materials needed for initial setup.
Guidelines for positioning the saw and establishing a safety zone.
How to clean the saw and protect its surfaces from rust.
Steps for attaching and aligning the fence rails.
Procedures for safely removing and installing the saw blade.
How to ensure the table insert is flush with the table surface.
Connecting to power and operating the magnetic on/off switch.
Understanding and resetting the saw's overload protection feature.
How to adjust the blade height for different cuts.
Adjusting the blade angle for bevel cuts.
Setting 90° and 45° bevel stops and aligning the angle pointer.
Explains ripping, bevel ripping, and cross cutting techniques.
How to adjust and use the miter gauge for accurate cuts.
Instructions for using a dado blade set for grooves.
Regular checks of switch, blade, table, and cabinet.
Guide to lubricating the blade tilt and height adjustment mechanisms.
Detailed parts list for the saw's internal mechanism.
List of parts for the main table and extensions.
Components related to the saw's cabinet and door.
Parts for the blade guard and splitter assembly.
Components for the miter gauge assembly.
To Next Page
General
