SETUP & OPERATION MANUAL
10” JOB SITE SAW /
CONTRACTOR SAW
FEATURES
50-090RK: JOB SITE SAW, INCLUDES
50-090R SAW AND FOLDING STAND
#50-095.
50-090RC: CONTRACTOR SAW, INCLUDES
50-090R SAW AND FIXED LEG STEEL STAND
#50-096.
Heavy-duty, precision cast-iron, ribbed table
with miter gauge t-slots.
2 1/2” dust port allows easy connection
to a dust collection system.
Deluxe, quick adjusting miter gauge.
Ruggedly built saw carriage.
Arbor driven by a two step belt, ensuring
straightness and accuracy when the blade
is tilted.
Heavy-duty folding stand with wheels for
easy mobility and storage (50-090RK M1).
Sturdy open base steel stand
(50-090RC M1)
.
Combination riving style splitter and see
through blade guard with anti-kickback
pawls, and a second European style riving
knife also included.
Includes new Excalibur aluminum T-fence
style precision rip fence system.
Smooth running belt driven 2 HP induction
motor for quiet start-up and operation, and
longer running life.
Large paddle-style stop switch.
VERSION 1_REVISION 1 - August 17/11
© Copyright General® International 08/2011
SPECIFICATIONS
BLADE DIAMETER
10’’ (254 mm)
ARBOR DIAMETER
5
⁄
8
” (16 mm)
MAXIMUM DEPTH OF CUT AT 90°
3
1
⁄
4
” (83 mm)
MAXIMUM DEPTH OF CUT AT 45°
2
5
⁄
16
’’ (59 mm)
MAXIMUM RIP TO RIGHT OF BLADE
36’’ (914 mm)
DADO CAPACITY
3
⁄
4
” (19 mm)
ARBOR SPEED
3450 RPM
TABLE SIZE (W/O EXTENSION WINGS)
20’’ x 25
1
⁄
4
” (508 x 641 mm)
EXTENSION WINGS SIZE (2)
10” x 25
1
⁄
4
” (254 x 641 mm)
DUST PORT DIAMETER
2
1
⁄
2
” (64 mm)
OVERALL DIMENSIONS (L X W X H)
69” x 38” x 42
1
⁄
2
” (1745 x 965 x 1080 mm) - 50-090RK
66
1
⁄
2
” x 38” x 43
1
⁄
2
” (1690 x 965 x 1150 mm) - 50-090RC
MOTOR (PRE-WIRED 110 V)
2 HP, 110 / 220 V, 13/6.5 A
WEIGHT
233 LBS (106 kg)
- 50-090RK
217 LBS (98.5 kg)
- 50-090RC
MODEL
#50-090RK M1
#50-090RC M1
5
0
-
0
9
0
R
K
50-
090RC
- Left tilt with riving knife
To Next Page
Need help?
General
