CLEANING
4. Remove the platform lock knob by turning it counter-clockwise.
5. Remove the platform by pulling it straight forward from the
platform carriage.
Knife Sharpener
WARNING: Use protective cut-resistant gloves when removing or
reassembling the knife sharpener.
1. Loosen the knife sharpener knob by turning it counter-
clockwise one turn.
2. Remove the knife sharpener by lifting it straight up and out of the
mounting bracket.
Knife Cover
WARNING: Use protective cut-resistant gloves when remov-
ing or reassembling the knife cover.
1. Remove the knife cover knob and rod assembly by turning
it counter-clockwise.
2. Push the knob and rod assembly in sharply against the knife cover
to dislodge it.
3. Remove the knife cover.
WASH ALL SURFACES
1. Clean all surfaces and parts of the slicer with hot, soapy water and
a clean cloth.
2. Clean the foodpusher shaft to remove food juices and ensure
smooth operation.
WARNING: Always use protective cut-resistant gloves when
cleaning the knife.
3. Clean the knife front with hot, soapy water and a clean cloth by wiping
outward from the center.
8
To Next Page
Loading...
Need help?
General
