ROOM THERMOSTAT HEATING CALIBRATION
If you want to take the temperature on your thermometers in your living space as reference, you need to calibrate
your room thermostat. For this:
When the device has ''Off '' status ''On/''Off'' button needs to be pressed for 3 seconds.
From the calibration menu which appeared, you may set to any temperature degree by pressing “Adjustment
o o
Buttons”. This value can be arranged between “-8 C and +8 C”
To exit calibration menu please press “On/Off” button once.
o
Note: Recommended tempreture calibration is “0.0 C”.
KEY LOCK
In room thermostat there is a key lock function to avoid any unintended contact.
In order to unlock the thermostat's key lock “Mode” button should be pressed for 3 seconds. If buttons on
thermostat are not touched for 10 seconds,key lock will be reactivated.
DAY AND HOUR SETTINGS
While your thermostat is On,keep pressing “Settings” button for 3 seconds.
At the first screen that appears “Hour” part will be blinking. You may set the time with ‘Up’ and ‘Down’ buttons.
After set the time, “Settings” button needs to be pressed once. For minute setting, minute part will be blinking.
You may set the minute with ‘Up’ and ‘Down’ buttons.
After set the minute, “Settings” button needs to be pressed once to set the day of week.
Days of every week begins with Monday so if you see 1 on the screen it means Monday is chosen. Likewise 2
would be Tuesday, 3-Wednesday, 4-Thursday, 5-Friday, 6-Saturday and 7-Sunday.
When setting is done you may exit by pressing for 3 seconds to “Settings” button.
generallife.com.tr5 / 9
To Next Page
Loading...
Need help?
General