How to fix no Bluetooth output on Generalscan GS-M500BT Barcode Reader?
If the laser or imager comes out from the scan windows of your Generalscan Barcode Reader, but there is no Bluetooth output, ensure the scanner is programmed to read the type of barcode being scanned. Also, confirm that the output mode is set to Bluetooth. Try moving the scanner closer to or further from the barcode to see if that resolves the issue.
What to do if iOS can't find Generalscan Bluetooth Barcode Reader?
If your iOS device can't find the Generalscan Barcode Reader via Bluetooth, try scanning the Pairing mode barcode. If that doesn't work, remove the paired scanner from your smartphone or tablet's Bluetooth settings and try pairing again.
Why no laser from Generalscan GS-M500BT Barcode Reader?
If there is no laser or imager coming out from the scan windows of your Generalscan Barcode Reader, try charging the battery using the Micro-USB port. Also, make sure the power switch is set to the ON position.
What to do if the laser or imager comes out from the Generalscan GS-M500BT Barcode Reader but there is no Bluetooth output?
If the laser or imager is active but there's no Bluetooth output from your Generalscan Barcode Reader, ensure the scanner is programmed to read the type of barcode being scanned. Also, confirm that the output mode is set to Bluetooth. Finally, try moving the scanner closer to or further from the barcode.
What to do if my iOS device can't find the Generalscan Bluetooth Barcode Reader?
If your iOS device is unable to find the Generalscan Bluetooth Barcode Reader, try scanning the Pairing mode barcode. If that doesn't work, remove the paired scanner from your smartphone or tablet and try again.
What to do if there is no laser or imager coming out from the scan windows of Generalscan GS-M500BT?
If no laser or imager is emitted from the scan windows of your Generalscan Barcode Reader, charge the battery using the Micro-USB port. Also, ensure that the power switch is set to the ON position.
What to do if Scanbuddy GS-X series plugged into smartphone can't work and no lighting comes from scan window?
If your Scanbuddy GS-X series isn't working when plugged into your smartphone and there's no light from the scan window, confirm that your device supports the OTG function and can provide at least 300mAh of current to the external scanner. Also, verify that the driver was installed properly.
Details charging voltage, battery volume, and charging time for specific models.
Guidance on aiming and scanning barcodes correctly for optimal performance.
Overview of product components and their identification via diagrams.
Explanation of functions for scanning window, buzzer, trigger, LEDs, and strap hole.
Explanation of functions for MicroUSB, power switch, and buckle for adapter.
Explanation of LED light signals for various device statuses like charging and pairing.
Instructions for attaching the scanner to a mobile phone adapter.
Specifications for charging GS-R1000BT and GS-R1500BT, including time and voltage.
Instructions for properly scanning barcodes with the ring barcode scanner.
Diagrams illustrating the components of the ring barcode scanners.
Details functions for scanning window, buzzer, trigger, LEDs, and Micro USB.
Details functions for power switch, strap hole, and battery cover.
Guide on how to adjust the velcro strap for comfortable finger wear.
Diagrams illustrating the components of the WT series wearable barcode terminals.
Details functions for power switch, charging port, LED indicator, Micro USB, and buckle.
Details functions for spring cable, smartphone platform, battery door, and Bluetooth LED.
Steps for installing WT series on smartphones and connecting components.
Identification of Scanbuddy components and their numbering.
Details functions for scan window, buzzer, scanner head, cover, MicroUSB plug, and screw hole.
Steps for device compatibility check, plugging in, and driver installation.
Instructions for installing Generalscan Keyboard and ScanBuddy apps.
Setting the output mode for barcode scanners (Bluetooth, USB-HID, USB-VPC).
Configuring Bluetooth connection modes (HID, SPP, BLE, SPP Master).
Adjusting hibernation time options for barcode scanners.
Scanning barcodes to read firmware version, device ID, and battery volume.
Instructions for entering DFU mode for firmware updates and resetting to factory defaults.
Configuring build-in suffix and offline storage modes for barcode data.
Setting auto trigger modes and resetting the Bluetooth device name.
Selecting desired keyboard layouts for HID mode (English, French, German, etc.).
Configuring function keys like TAB, LF, CR, CR LF, and SPACE.
Configuring dongle pairing, factory settings, firmware, MAC address, and output modes.
Adjusting beep, vibration levels, and volume settings for scanner feedback.
Instructions for pairing GS-M series scanners with various devices via Bluetooth.
Guides on switching between HID, SPP, and BLE modes for optimal connectivity.
Solutions for problems related to barcode scanning and Bluetooth output.
Troubleshooting common issues with Bluetooth connectivity and Scanbuddy operation.
Covers regulatory compliance, laser classification, and related statements.
Provides ergonomic advice to prevent injury and promote safe working practices.
Guidelines for safe battery usage, charging, disposal, and handling precautions.
Information on contacting support for service issues and warranty details.
General| Scanning Technology | Laser |
|---|---|
| Connectivity | Bluetooth, USB |
| Battery Life | Up to 6 hours continuous scanning |
| Charging Time | Approximately 3 hours |
| Weight | 70g |
| Compatibility | Windows, Android, iOS |
| Type | Barcode Scanner |
| Supported Symbologies | 1D barcodes |
| Supported Barcode Types | UPC/EAN, Code 39, Code 128 |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
To Next Page
