Need help?Do you have a question about the Generalscan GS-M100BT and is the answer not in the manual?
General| Scanning Technology | Laser |
|---|---|
| Connectivity | Bluetooth |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -20°C to 60°C |
| Compatibility | Android, iOS, Windows |
| Supported Barcode Types | UPC, EAN, Code 39, Code 128 |
| Supported Symbologies | 1D |
Step-by-step guide for installing and setting up the WT series.
Configures whether barcode scanning is enabled or disabled.
Selectable modes for barcode data output interface.
Configuration options for Bluetooth pairing modes.
Adjusts the scanner's hibernation time for power saving.
Retrieves firmware version, device ID, and battery volume.
Procedure for updating scanner firmware using DFU mode.
Resets the scanner to its default factory settings.
Configures suffix settings for Carriage Return/Line Feed.
Enables or disables low power mode for the decode board.
Configures Android USB accessory settings like charging mode.
Enables, disables, or checks information about offline storage.
Selects upload speed for data stored offline.
Configures continuous reading modes for the scanner.
Solutions for issues with scanner laser/imager output or Bluetooth.
Troubleshooting steps for iOS devices not finding the scanner.
Essential safety precautions for charging and using batteries.
Guidelines for safe battery handling, storage, and avoiding hazards.
To Next Page
