Version: 2020-09-04
108
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
Scheduler
For this configuration step, navigate to the following menu:
Regardless of all system events, the models of the CS141 series offer the possibility to run jobs at freely definable times.
These so-called scheduled jobs can be used, for example, to control subordinate systems, to restart computers, to perform battery tests,
etc.
Configuration menu for scheduled jobs
As factory default configuration, no job is defined. They need to be defined by administrators or engineers
Press +:to start scheduled task configuration dialog
The job configuration dialog is similar to UPS event job configuration dialog. Timing configuration differs due to the fact these jobs have
to be triggered independently to UPS alarm states:
Start: enter date and time the job will be executed the
first time.
Repeat toggles the job repeating behavior
These values are valid:
One time: only one execution
Daily:
Every day depending on system time
Weekly:
Once a Week depending on system time
Monthly:
Once a month depending on system time
Note:
In some cases, jobs can be set ups can vary according the configuration of connected devices.
To Next Page
Loading...
