Generex CS141 - Page 36

To Next Page

To Previous Page

Version: 2020-09-04

TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)

Guest access

User guest

Default Password: guest

The guest access is designed to view system monitors without triggering additional functions. Due to this fact, a special feature comes

with this user: If necessary, password queries can be deactivated by administrators.

➔ Enable/disable password query

➔ Enter a new password

➔ Verify password

To use guest access without password query, set the mark for Anonymous Access. Otherwise the CS141 will ask for a valid password.

Note:

The user admin is allowed to manage COM interfaces, but not the user engineer. This is necessary due to the fact, attached monitoring

systems may need to be prepared for a change inside the hardware landscape before local hardware or components will be disabled for

local maintenance duties.

If a technician already "starts" before administrators stop according monitoring services, wrong alarm states may cause trouble.

How to use guest /anonymous login

The guest access can be used for

Normally, the CS141 only provides information via its web interface if a user successfully logs in - a deep link to view the UPS monitor

directly is treated accordingly:

After activating Anonymous authentication, it is possible to view the monitoring screens directly – it is even possible to create a small

html page and set up an i-frame to show it inside larger websites or content management systems. This html code may help you to

create the html webside:

<body>

<p>I-Frame zu der USV mit der IP xxx </p>

USV"></iframe>

</center>

</body></html>

As a result, the UPS monitoring screen will appear inside your html document:

Other manuals for Generex CS141