Generex CS141 - Page 37

Version: 2020-09-04
37
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
Possible deep links:
http://10.10.10.10/www/devices/ups/page Opens the UPS monitoring screen
http://10.10.10.10/www/devices/sensor/page Opens the Sensor monitoring screen
http://10.10.10.10/www/devices/bacs/page Opens the BACS monitoring screen.
Note
By using the web query directly, you will notice the URL inside your web browser will change. This is because you start a page request,
but the web server on the CS141 responds with a different page and will redirect you automatically: Since the page behavior is
dynamically, the response page may change accordingly. However, the HTML request is standardized with these three deep links and
will be served as long as the Anonymous login is active.
Advanced system overview
For this configuration step, navigate to the following menu:
After completing all basic settings, the advanced system overview will list available information about your CS14.
The system overview is divided into several sections:
System overview
If there are questions or some issues during installation, our technical support will help as fast as possible. Please note, our support
needs at least following information:
- Firmware
- UPS model and type
- Uptime since last reboot
Hardware
➔ System serial number
➔ Hardware revision
Since 2018, there are two CS141 hardware revisions available on the market. They differ in some aspects inside:
All CS141 that are built in 2018 uses a new flash kit. Due to this fact there are some registrations to firmware versions:
Earlier versions of CS141 are fully update compatible, but the newer version is designed to run from firmware 1.66.xx onwards. In
support cases it is essentially required to know your hardware release:
- bch16 can run earlier firmware version than 1.66.XX
- bch 8 runs with minimum firmware 1.66.XX
Ensure to use the correct firmware, if you are using bch 8 – feature, old firmware will not run.