Version: 2020-09-04
39
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
In general, there are two different options to restart the device:
Option 1 – the cold boot
Briefly disconnect power by pulling the power plug or removing the card from the slot. The device will then boot to the appropriate
operating state with the new hardware setting.
Option 2 - Reboot by software
For this step, please switch to the following menu:
The toolbox is restricted for administration usage only.
After login as hard-coded user admin using default password
cs141-snmp, you will be allowed to use the toolbox with extended
support features. Please note: The default password is only
active in case of no other password was set.
Afterwards it is possible to us the CS141 reboot option.
In both cases the UPS will not be restarted, but it only affects the CS141 - your power supply is ensured.
System notifications
Setting up email services
For this configuration step, navigate to the following menu:
The CS141 provides a variety of options to interact with the environment, external devices, and the network itself.
For this, the necessary services must be configured.
One basic feature is the automatic notification via email and email traps. Due to the fact the CS141 does not provide a complete mail
server, a valid email account must be configured.
To Next Page
Loading...
