Generex CS141 - Page 40

Version: 2020-09-04
40
Copyright of the European Union is effective (Copyright EU) (c) 2019 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
Mail server
Enter the mail server to be used.
To ensure a maximum of flexibility, the CS141 allows an appropriate IP address as well as an URL of external mail provider.
Administrators can choice between additional external provider or use own mail servers.
Note:
The fact, your CS141 has a connection to the Internet to access external accounts of large mail providers does not mean an external
provider will allow a usage for free. Sometimes they start to block service mails without stating reasons or failure message. It just stops
working. In this case, it may be necessary to switch to another provider.
SMTP Port
Defines the port used by a mail client to communicate with the mail server. Basically, the ports are standardized. In some cases,
administrators need to choose own ports configurations to ensure communication; The necessary access data must be obtained from
the local administrator.
Connection Security
Select the encryption type used by the CS141 for sending the emails:
None no encryption required
If available STARTTLS
Force encryption SSL / TLS
Sender Email Address
Enter the mail address to be shown as sender
Email authentication – user and password
Depending on its configuration, email servers either use the e-mail address as their username or their own user ID and password to
receive e-mails.
For the valid access data, please contact the local network supervisor.
Advanced Error Log Options
The CS141 offers the possibility to send mail traffic as a blind carbon copy, too.
For some cases, this facilitates the analysis for example, if the sequence of an event has to be examined.
With this menu, administrators may specify:
- What else should be sent
- The format to be use
- When it should be sent
Format
In some cases, mails will be stored by using database systems. This option enables sending mails compatible formatted.
Log
This setting toggles the conditions whether a sent mail will be registered by event log.
Administrators can choose:
Errors only Mails that indicate errors are recorded in the event log
Always Each mail is recorded as "sent" in the event log
Never The mails are sent but not recorded in the event log.