Generic TR 125 - Specification; Vehicle Technical Specifications

SPECIFICATION


Model TR 125
Engine
Engine type QJ 160 MI - A
Overall Length
(mm)
2030 Fuel type
95 octane unleaded
gasoline
Overall Width (mm) 845
Number of
cylinders
1
Overall height
(mm)
1120 Bore*stroke Ɏ 60 mm *44 mm
Wheelbase (mm) 1385 Displacement 124.4
Vehicle Weight (kg)
Front
axle
63 kg Starting mode Electric
Rear
axle
76 kg Cooling mode Water cooled
Total 139 kg Lubricating mode
Force-feed and splash
lubrication
Wheel
Specification
Front (External)
Oil tank capacity 1.2 L (Oil change 1 L)
100/80-17
Rear˄External˅
Air cleaner Filter sponge
130/80-17
Drive Train
Clutch type
Wet multi-plate
friction type
Fuel tank capacity 7.5 L ± 0.2 L
Performance
Top speed 110 km/h
Gear shift
pattern
Manual 6 gear
Slope climbing
force
Maximum climbing
angle is not less than
20 degrees
Idle speed 1700± 100 rpm/min
Drive Train Clutch type
Max. torque 12.18 Nm/ 7500 r/min
Electrical
Battery
capacity/type
12 V – 6 AH
YUASA TT27SL
Max. power 11 Kw/ 9000 r/min
Generator type
Alternating current
permanent
magnetic motor
Compression ratio 12.0 : 1
Spark plug NGK-CR8E
Pressure of
cylinder
12,5-13,5 bar
Spark plug
clearance
0.7~0.8 mm
Braking
system
Diameter of front
brake disc
ĭ 280 mm
Ignition type CDI
Diameter of rear
brake disc
ĭ 240 mm
QJ125GY-16A
TR 125