Snapshots
While the camera is recording, at any time you can press the button to
take a snapshot. The LCD screen will show a flashing green square, which
indicates that the snapshot is generating.
Video Recording
In standby mode, the user may start video recording by pressing the
button. Recording will initiate the LED working status indicator, audio
prompt, LCD indicators, and vibration. Press the button again to stop
the recording and switch back to standby mode. Camera’s audio, visual,
and vibration prompts will occur again when recording is stopped.
Splitting Video Footage
Go into the settings menu by pressing (default passcode is 000000),
find the [Split Time] option, and press the button to select the video
segment duration. Once selected, video footage will be divided into
segments based upon your selection.
Pre-recording
Pre-recording will record up to 5 seconds before the button is pressed.
We recommend turning this option on for users that will not be recording
all of the time to make sure that everything going on is captured.
However, this feature will use extra battery power. To turn this feature on
To Next Page
Loading...