One-button Video Recording
Whenever the camera is powered off, hold the button for 2 seconds
to immediately turn on the camera and begin recording.
One-Button Resolution Switch
Hold the button until you feel a vibration. Doing this will allow you to
switch the video resolution quickly between 1280*720 @30fps and
1920*1080 @ 30fps. 1280*720 @30fps will provide lower quality video,
but a longer battery life and less memory used per video.
Photo Timer
You can set the timer for photos by going into the settings menu by
pressing (default passcode is 000000) and selecting the [Timer] or [Self
timer] option. Doing so will provide a delay before the photo is taken
when pressing the button.
Device and User ID
Go into the settings menu by pressing (default passcode is 000000) and
selecting the [ID setting], then pressing . You can enter up to 5
characters for the device ID and up to 6 characters for the user ID. Use the
and buttons to make selections. Press to select. When done,
To Next Page
Loading...