104
Using Voice Recognition
Creating a Suitable Cabin Environment
Voice recognition technology allows you to operate the phone,
AV and Navigation system through voice commands. To ensure
optimal voice recognition performance, please do the following.
•
Press the voice recognition key and say the command
after system instructions and beep.
•
Only commands listed within the user's manual are
supported. Check the commands listed in the user's manual
before starting use.
•
For good voice recognition performance, maintain proper
position when saying commands.
•
Voice recognition may be affected by ambient noise.
•
High noise level due to high speed blower from air vents
may lower the performance. Please avoid air vents direction
towards the overhead consol.
•
For improved voice recognition performance, make the
environment quiet and speak the command in a moderate
tone with clear pronunciation.
During voice recognition, adjust the volume to change voice
guidance volume.
•
Say commands naturally and clearly to ensure better
performance.
•
Monosyllable names saved within contacts may not be properly
recognized. (Example: Tom, John)
•
Contacts with special characters will not be recognized.
(Example: John Doe_Friend)
•
Contacts with upper letters should be pronounced by letters.
For numbers, digit-by-digit.
Voice Recognition Features by Language
Voice recognition supported features may vary for each
languages. If the system language is set to Korean, this feature
will not be supported.
Voice Recognition
To Next Page
Loading...
