105
Starting Voice Recognition
Press the key on the steering remote controller.
Information
•
If the voice recognition guidance is set to [Beginner] mode, then voice
recognition guidance will provide with more detailed prompts.
•
If set to [Normal], voice recognition guidance will provide short and
simple prompts. For more information on voice recognition guidance,
refer to the "Voice recognition settings" section on page 115.
Skipping Voice Guidance Messages
While voice guidance is being played, shortly press the key
on the steering remote controller, it will immediately skip with
a beep. Once the screen icon changes from to , say the
desired voice command.
Ending Voice Recognition
While voice recognition is operating, Press and hold the key
on the steering remote controller.
Adjusting Voice Recognition Guidance Volume
While voice recognition is operating, turn the volume dial on
the Head Unit or use the “VOL+/VOL-” buttons on the steering
remote controller to adjust the voice guidance volume level.
Voice Recognition
To Next Page
Loading...
