To Next PageTo Next PageWhat to do if burner does not light on Genesis Gas?
If the burner on your Genesis Grill does not light, or the flame is low in the HIGH position: * Check the fuel hose for bends or kinks and straighten it. * If you can light the front burner with a match, check the Crossover Ignition System.
What to do if Genesis Gas has flare-ups?
If your Genesis Grill is experiencing flare-ups, consider the following: * Ensure you are preheating the barbecue correctly by setting all burners to high for 10 to 15 minutes. * Clean the cooking grates and Flavorizer bars thoroughly if they are heavily coated with burned-on grease. * Clean the bottom tray to ensure grease can flow into the catch pan.
Why burner flame pattern is erratic on Genesis Gas Grill?
An erratic burner flame pattern, low flame when the burner is on HIGH, or flames that don't run the whole length of the burner tube on your Genesis Grill can be caused by dirty burners. Clean the burners following the General Maintenance instructions.
General| Main Burners | 3 |
|---|---|
| Burner Material | Stainless steel |
| Fuel Type | Propane |
| Ignition | Electronic |
| Warranty | 10 years |
Safety warnings about gas leaks and potential fire/explosion hazards.
Warnings on storing flammables and operating the grill safely.
Emphasizes reading the owner's guide before operating the grill.
Hazards from not following Dangers, Warnings, Cautions; storage, assembly, operation safety.
Child safety, fire safety, gas type, equipment, and escaping gas protocols.
Checking the alignment of the manifold and burners for proper operation.
Safety warning about checking for gas leaks without open flames or sparks.
Instructions for applying soap solution and checking connections for bubbles.
Specific connections to check: hose-manifold, valves-manifold, hose-quick disconnect.
Summary of lighting steps, including DANGER and WARNING notes.
How the crossover ignition system works and safety checks for the hose.
Detailed sequence for lighting the grill, including opening lid and turning knobs.
Procedure for safely turning off the barbecue burners and gas supply.
Steps for lighting the grill manually with a match if ignition fails.
How to turn off the burners and gas supply to extinguish the grill.
Warnings about grease build-up and preventing grease fires.
Checking hose, flame pattern, and gas fittings for leaks.
Repeating gas leak checks after any disconnection/reconnection.
Checks for ignition wire attachment and igniter loose fit for the crossover system.
Problems like yellow flame, no light, or low flame and their solutions.
Addresses flare-ups, erratic flame patterns, and low flames.
