Genesis GBS900 - Table and Guide Adjustments; Lower Blade Guide and Height Setting; Aligning the Table to the Blade

11
English
To adjust the lower blade guide (FIG 10):








NOTE:

Blade Guide Assembly Height Adjustment (FIG 11)




 WARNING: Always be sure that the tool is switched off and unplugged
from the power source before adjusting, adding accessories, or checking a
function on the tool .
Squaring the Table to the Blade (FIG 12)







7
6
5
4
1
2
3
2
FIG 9
2
5
6
2
4
3
1
FIG 10
1
2
FIG 11
2
1
3
FIG 12