English
9" Band Saw
Operator’s Manual GBS900
UNPACKING AND CONTENT
IMPORTANT:Due to modern mass production techniques, it is
unlikely the tool is faulty or that a part is missing. If you find anything
wrong, do not operate the tool until the parts have been replaced or the
fault has been rectified. Failure to do so could result in serious personal
injury.
Contents in Package:
Description QTY Description QTY
WARNING: If any parts are missing or damaged, do not attempt to
assemble the saw, plug in power cord or turn the switch on until the missing or
damaged parts are replaced.
ASSEMBLY
WARNING: Always be sure that the tool is switched off and unplugged
from the power source before adjusting, adding accessories, or checking a
function on the tool
.
Installing the Saw Table (FIG 2, 3)
(
NOTE :
Installing the Rip Fence
1 2
4
3
5
6
7
FIG 2 FIG 3
8