Genesis GF200 - Hi-Speed Sync Triggering

8
Flash Modes Cont.
Hi-speed Sync Triggering Mode
Maximum Stroboscopic Flashes
1 2 3 4 5 6 7
1/1 1 1 1 1 1 1 1
1/2 1 1 1 1 1 1 1
1/4 30 2 2 2 2 2 1
1/8 50 4 2 2 2 2 2
1/16 70 70 7 4 3 3 3
1/32 80 80 80 16 8 6 5
1/64 99 99 99 99 99 99 25
1/128 99 99 99 99 99 99 99
Hz
Flash
Output
8 9 10-11 12-13 13-15 15-19 20-99
1/1 1 1 1 1 1 1 1
1/2 1 1 1 1 1 1 1
1/4 1 1 1 1 1 1 1
1/8 2 2 2 2 2 2 2
1/16 2 2 2 2 2 2 2
1/32 5 4 4 16 8 6 5
1/64 15 10 6 6 5 5 5
1/128 99 99 99 99 99 36 20
Hz
Flash
Output
To enter mode, press both Mode Selection Button (19) and Set Button (20).
Press Mode Selection Button (17) again to exit mode.
In Hi-speed sync triggering mode, you can use a hi-speed sync trigger to
have your flash unit synchronized with all shutter speeds. This is convenient
when you want to use aperture-priority for fill-flash portraits.
Note:
- Hi-speed sync triggering mode is effective only when the flash is used together with
hi-speed sync trigger.
- Hi-speed sync triggering mode is not available when the flash unit is mounted onto
the camera’s hot shoe.
***To avoid overheating and deteriorating the flash head, do not use
stroboscopic flash more than 10 times in succession.