5
English
SERVICE
• Haveyourpowertoolservicedbyaqualiedrepairperson
• Serviceyourpowertoolperiodically.
WARNING:READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND 
OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all 
instructions listed below may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
EXTENSION CORDS
Grounded tools require a three wire extension cord.
Guidelines for Using Extension Cords
 
 
 
SPECIFIC SAFETY RULES FOR CIRCULAR SAWS
 WARNING: DO NOT LET COMFORT OR FAMILIARITY WITH PRODUCT 
(GAINED FROM REPEATED USE) REPLACE STRICT ADHERENCE TO PRODUCT SAFETY 
RULES. If you use this tool unsafe or incorrectly, you can suffer serious personal injury! 
•
Hold the tool by insulated gripping surfaces
 
•
  DANGER! Keep hands away from cutting area and blade.
 
Recommended Minimum Wire Gauge for Extension Cords (120 Volt)
Nameplate 
Amperes  
(At Full Load)
Extension Cord Length
25 Feet 50 Feet 75 Feet 100 Feet 150 Feet 200 Feet
0–2.0      
2.1–3.4      
3.5–5.0      
5.1–7.0      
7.1–12.0      
12.1–16.0      
16.1–20.0