Online resources and information at MYGENESIS.COM
18
MAIN MENU
Enrolling Fingerprint
1. Turn on the vehicle with a smart key.
2. Select ‘Setup → User Profile Settings → Fingerprint Identification’ on the
infotainment system screen.
3. Set password to access the Fingerprint Identification menu.
4. Once a password is set up, select ‘Add/Delete Fingerprint.’
5. Following the instructions, place several parts of your fingerprint until the
scanning process is complete.
6. Once the scanning process is completed, the message ‘Saving
fingerprint...’ appears and the fingerprint enrollment process is complete.
7. When the fingerprint enrollment process is completed in the vehicle, the
status is displayed on the infotainment system.
Deleting Fingerprint
1. Select ‘Setup → User Profile Settings → Driver 1 → Fingerprint Identification
→ Set/Delete Fingerprint → Delete’ in the infotainment system.
2. Delete the enrolled fingerprint according to the message ‘Delete all
Driver 1 fingerprints?’
3. Once the fingerprint is deleted, the status is displayed on the infotainment
system screen.
Important Information
To delete your fingerprint, at least one smart key must be in the
vehicle (if equipped with engine start-up feature with fingerprint
authentication).
CAUTION
Do not participate in duplicating your fingerprint with anyone.
CoNVENIENCE
SETTINGS/FEATURES
To Next Page
Loading...
