Online resources and information at MYGENESIS.COM
6
MAIN MENU
Before you start
Make sure your phone is connected to your vehicle and your phone contacts
have been downloaded to the vehicle. If this has not been done, please
follow the instructions on page 4.
2. After the beep, say the
command “Call” followed
by the name of the desired
contact.
Example: “Call John Smith”
1. Press the ‘Push to Talk’ button
on the steering wheel.
*
You will hear “Please say a
command,” followed by a beep.
*
Steering wheel appearance may differ depending on trim level.
3. The selected number will be
dialed and your contact’s name
and phone number will appear
on the screen.
4. To end the call, press the ‘Call’
button located on the steering
wheel.
By vOiCE COMMANdS uSiNg BLuETOOTH
MAKING A CAll
To Next Page
Loading...
