Genesis GV60 - Immobilization; Stabilization; Lifting

The next step is to immobilize the vehicle to prevent any accidental movement that
can endanger the emergency response personnel and any crash victims. Since the
Electrified GV60 doesn’t have an engine, there will be instances where the vehicle
appears to be off because of the absence of engine noise. When in its “ready” mode,
the vehicle can move almost silently using the electric motor. Responders should
approach the vehicle from the sides and stay away from the front or rear as they are
both potential paths of travel. Instructions for immobilizing the vehicle are shown
below.
2. Immobilization / stabilization / lifting
3
5. Chock the Wheels.
2. Push “P” button on the shift
selector.
1. If the “P” button is not visible,
turn the crystal sphere.
3. Engage Parking Brake
4. Press the START/STOP Button.
Immobilize
* The actual image of vehicle may differ from the illustration