18
INSTALLATION
GENERAL
Installation and wiring compliance
- Installation and wiring must comply with the standard electrical codes and must be done
by a qualified electrician
- The DC input positive and negative terminals are isolated from the chassis. Similarly, the
neutral pole of the AC receptacles / the neutral wire is not bonded to the chassis. System
grounding to suit the standard electrical codes is to be undertaken by the installer.
Preventing electrical shock
- Always connect the grounding connection on the XM Series UPS to the appropriate
grounding system.
Installation environment
- The XM Series UPS should be installed indoor only in a well ventilated, cool, dry
environment
To Next Page
Loading...