Genie 2128 User Manual

INSTALLER: LEAVE THIS MANUAL WITH HOMEOWNER
HOMEOWNER: SAVE THIS MANUAL FOR FUTURE REFERENCE
BELT/CHAIN DRIVE GARAGE DOOR OPENERS
PROGRAMMING, OPERATION & MAINTENANCE MANUAL
39786503812, 03/2018
SERIAL NUMBER DECAL
STOP
DO NOT return product to store,
visit www.GenieCompany.com
or call Customer Service at: 1-800-35-GENIE
iDCM SERIAL NUMBER DECAL
To reduce the risk of injury to persons or damage to property, use this opener only with a sectional residential
door.
WARNING
Por reduire le risque de blessures ou de dommages materials, utillsez cet ouvre-porte uniquement pour une porte
a section re sidentielie.
AVERTISSEMENT
!
!
Refer to the assembly poster
for opener assembly and
installation instructions. Return
to this manual for programming,
operation and maintenance.
• SingleBulbModels
• DualBulbModels
• BBUModels
• iDCMModels
• IntegratedLEDlightedModels
DO NOT use photocells from other manufacturers or openers with this opener.

Genie 2128 Specifications

General

Model	2128
Type	Garage Door Opener
Motor	DC
Smartphone Control	Yes
Battery Backup	No
Voltage	120V
Drive Type	Belt Drive
Safety Features	Safe-T-Beam system
Drive	Belt Drive
Motor Type	DC
Security	Intellicode

Summary

1 Introduction

Important Installation Instructions

Crucial instructions for safely installing the garage door opener to prevent injury or damage.

2 SAFETY & STANDARD FEATURES

Safe-T-Beam® (STB) Non-Contact Reversing System

Intellicode® Encryption Remotes

3 OPENER PROGRAMMING & ACCESSORY INSTALLATIONS

Down Travel Limit Programming

Up Travel Limit Programming

Force Control and Contact Reverse

Details force control settings and testing the safety reverse feature.

Additional Remote Control Programming

Aladdin Connect Programming

4 MAINTENANCE

Important Safety Instructions

Crucial safety guidelines for maintaining the garage door opener.

Regular Inspection and Maintenance Schedule

5 SPECIAL INSTALLATION INFORMATION

Force Setting Guide

Guide on adjusting force settings for specific door conditions.

Clearing Memory of Remotes

Installing Safe-T-Beams®

Instructions for installing Safe-T-Beam sensors, including preventing cross-talk.

Installing Battery Backup

6 TROUBLESHOOTING

Troubleshooting Common Problems

Guide to diagnose and resolve common issues with the garage door opener.

Powerhead LED Indicators

Explains the meaning of powerhead LED lights for troubleshooting.

Battery Backup Troubleshooting LEDs

Interprets LED signals related to the battery backup system.

8 DASMA SAFETY GUIDELINES

Safety Alert Symbol Explanation

Explains the safety alert symbol indicating potential hazards.

Garage Door Safety Precautions

General safety guidelines for operating garage doors and openers.