Genie GS-1330m User Manual

First Edition • Second Printing Operator's Manual
Operating Instructions
Part No. 1290846GT GS
™
-1330m 43
Emergency Stop
Push in the red Emergency Stop button to the off
position at the ground controls or the platform
controls to stop all functions.
Repair any function that operates when either red
Emergency Stop button is pushed in.
Emergency Lowering
1 Pull the emergency lowering knob to lower the
platform.
Operation from Ground
1 Be sure the battery pack is connected before
operating the machine.
2 Turn the key switch to ground control.
3 Pull out both ground and platform red
Emergency Stop buttons to the on position.
To Position Platform
1 At the control panel, press and hold the lift
function enable button.
2 Press the platform up or down button.
Drive and steer functions are not available from the
ground controls.
Operation from Platform
1 Be sure the battery pack is connected before
operating the machine.
2 Turn the key switch to platform control.
3 Pull out both ground and platform red
Emergency Stop buttons to the on position.
To Position Platform
1 Press the lift function button.
On the LCD screen, a circle
below the lift function symbol
will turn on.
If the control handle is not moved within seven
seconds of pushing the lift function button, the
circle below the lift function symbol will turn off and
lift function will not operate. Press the lift function
button again.
2 Press and hold the function enable switch on
the control handle.
3 Machines equipped with foot switch: Press and
hold the foot switch and press and hold the
function enable switch on the control handle at
the same time.
4 Move the control handle in the direction
indicated by the markings on the control panel.

Genie GS-1330m Specifications

General

Brand	Genie
Model	GS-1330m
Category	Scissor Lifts
Language	English