Need help?Do you have a question about the Genie S-100 and is the answer not in the manual?
General| Brand | Genie |
|---|---|
| Model | S-100 |
| Category | Boom Lifts |
| Language | English |
Explains Genie's system of symbols, color coding, and signal words for hazards.
Defines the machine's purpose for lifting personnel and materials to aerial work sites.
Details requirements for personal fall protection equipment (PFPE) when operating the machine.
Warns about the risks of electrocution from proximity to electrical power lines.
Outlines risks associated with exceeding platform capacity or operating on unstable surfaces.
Highlights risks from hydraulic or air leaks and the need for ventilation.
Addresses hazards associated with battery handling, including burns and explosions.
Provides instructions and warnings for operating welding equipment on the machine.
Details safety precautions and load limits when using pipe cradles.
Outlines safety precautions and load limits for using panel cradles.
Explains the functions and layout of the ground-based control panel.
Explains the functions and layout of the platform-based control panel.
Discusses the importance and purpose of pre-operation inspections.
Explains the purpose of function tests to discover malfunctions.
Details the steps for performing function tests using ground controls.
Instructions for testing all operational functions of the machine.
Procedures for verifying the correct operation of the machine's steering modes.
Steps to test the machine's drive and braking systems for proper function.
Guides the operator on identifying and avoiding hazardous conditions in the work area.
Instructions for verifying the presence and legibility of machine decals.
Step-by-step guide on how to start the machine's engine.
Information on using emergency power and controls when the primary power fails.
Instructions for operating the machine from the platform controls.
Guidance on determining slope grades and safe driving practices on inclines.
Describes indicators and actions to take when the platform is overloaded.
Explains how to interpret fault codes displayed on the ground control LCD.
Details the installation and use of pipe cradles on the platform.
Instructions for safely operating the machine with panel cradles installed.
Steps to enable free-wheeling for winching operations.
Procedures for safely securing the machine for transportation.
Guidelines for properly rigging and lifting the machine using cranes.
Instructions for checking and maintaining the engine oil level.
Procedures for checking and maintaining the hydraulic oil level.
Specifies the types of diesel fuel required for different engines.
Guide for checking battery condition and connections for safety and performance.
Outlines the requirements for periodic maintenance performed by qualified technicians.
Technical specifications for the S-100 model.
Technical specifications for the S-105 model.
Technical specifications for the S-120 model.
Provides sound pressure and power level data for the machine.
Technical specifications for the S-125 model.
Illustrates the operational reach and movement capabilities of the S-100.
Illustrates the operational reach and movement capabilities of the S-105.
Illustrates the operational reach and movement capabilities of the S-120.
Illustrates the operational reach and movement capabilities of the S-125.
To Next Page
