Need help?Do you have a question about the Genie S-45 TRAX and is the answer not in the manual?
General| Gradeability | 45% |
|---|---|
| Fuel Type | Diesel |
| Maximum Working Height | 15.72 m |
| Maximum Platform Height | 13.72 m |
| Lift Capacity | 500 lb (227 kg) |
| Turning Radius | 10 ft 8 in (3.25 m) |
| Turning Radius (Outside) | 10 ft 8 in (3.25 m) |
| Machine Length | 7.55 m |
Critical safety warning about severe injury or death from non-compliance.
Precautions against hazards from contact with electrical power lines.
Consequences of misusing the machine and conditions for safe operation.
Warning regarding hazards from fuel, fumes, and hot surfaces.
Mandatory use of personal fall protection equipment (PFPE) when operating the machine.
Precautions regarding electrical clearance and proximity to current.
Requirements for safety belts/harnesses and safe platform footing.
Guidelines for operating the machine on inclines and slopes.
Precautions against flammable gases, fuels, and ignition sources.
Procedures for inspecting and handling damaged or malfunctioning machines.
Maximum platform capacity and occupant limits for stability.
Operator's responsibility for visual inspection before each work shift.
Checklist of items for a thorough pre-operation inspection.
Purpose of function tests to discover malfunctions before service.
Conditions that must be met before operating the machine.
Procedures for starting gasoline/LPG and diesel engines.
Procedure to stop all machine functions and turn off the engine.
Determining slope ratings and grade for safe driving on inclines.
Procedure for checking and maintaining proper engine oil levels.
Procedure for checking and maintaining engine coolant levels.
Procedure for checking and maintaining proper hydraulic oil levels.
To Next Page
