Need help?Do you have a question about the Genie S-80 and is the answer not in the manual?
General| Platform Height | 80 ft |
|---|---|
| Lift Capacity | 500 lbs |
| Platform Length | 8 ft |
| Platform Width | 3 ft |
| Power Source | Diesel |
| Working Height | 86 ft |
| Platform Rotation | 160° |
| Swing | 360° continuous |
| Gradeability - 4WD | 45% |
| Auxiliary Hydraulic Power Unit | Yes |
| Fuel Tank Capacity | 30 gal |
| Hydraulic Tank Capacity | 30 gal |
| Machine Width | 8 ft 2 in |
| Engine Power | 74 hp |
| Steering | 4-wheel |
| Outriggers | No |
| Up and Over Clearance | 26 ft |
| Controls | Proportional |
| Tires | Foam-filled |
Guidelines for individual safety.
Guidelines for a safe work environment.
Critical safety and operational guidelines.
Critical safety and operational guidelines.
Essential preparation for repairs.
Calibrating and adjusting joysticks.
Testing and calibrating overload system.
Major boom removal steps.
Cable adjustment for boom operation.
Essential procedure after maintenance.
Adjustment for quiet operation.
Relief valve adjustment.
Linkage adjustment for stability.
Preparation for fault diagnosis.
Using LEDs to identify codes.
Engine fault code retrieval.
Detailed fault code table.
Detailed fault code table.
Engine fault retrieval and clearing procedures.
Detailed fault code table.
Electrical diagrams.
Hydraulic diagrams.
Schematics for S-80X ground and platform control boxes.
Schematics for S-80/S-85 models with Deutz, Perkins, Continental engines.
Hydraulic system diagram for 2WD models.
To Next Page
