6
ENGLISH
CE DECLARATION OF CONFORMITY FOR MACHINES
(DIRECTIVE 98/32/EC)
Manufacturer: GENIUS S.p.A.
Address: Via Padre Elzi, 32 - 24050 - Grassobbio- Bergamo - ITALY
Declares that: Operator mod. G-BAT ENV
is built to be integrated into a machine or to be assembled with other machinery to create a machine under the provisions of Direc-
tive 98/32/EC;
conforms to the essential safety requirements of the following EEC directives:
2006/95/EC Low Voltage directive.
2004/108/EC Electromagnetic Compatibility directive.
Furthermore, the manufacturer declares that the machinery must not be put into service until the machine into which it will be integrated
or of which it will become a component has been identified and its conformity to the conditions of Directive 89/392/EEC and subsequent
modifications assimilated in Italian National legislation under Presidential Decree No. 459 of 24 July 1996 has been declared.
Grassobbio, 21 April 2009
The Managing Director
D. Gianantoni
•
•
•
•
Notes on reading the instruction
Read this installation manual to the full before you begin installing the product.
The symbol indicates notes that are important for the safety of persons and for the good condition of the automated system.
The symbol draws your attention to the notes on the characteristics and operation of the product.
INDEX
1. DESCRIPTION page.7
1.1. TECHNICAL SPECIFICATIONS page.7
1.2. DIMENSIONS page.7
2. INSTALLATION page.7
2.1. ELECTRIC PREPARATIONS (STANDARD SYSTEM ) page.7
2.2. PRELIMINARY CHECKS page.8
2.3. INSTALLATION DIMENSIONS page.8
2.4. INSTALLING THE OPERATOR page.8
3. ELECTRICAL CONNECTIONS page.9
4. START-UP page.9
5. AUTOMATED SYSTEM TEST page.9
6. MANUAL OPERATION page.10
7. RESTORING NORMAL OPERATION MODE page.10
8. MAINTENANCE page.10
9. SPECIAL APPLICATIONS page.10
10. REPAIRS page.10
11. ACCESSORIES page.10
To Next Page
Loading...
Need help?
General
