26
Instruction manual
GB
26
Troubleshooting
WARNING!
Switch o the device and remove the plug before xing an error! This may otherwise lead to injuries or
electric shock.
Problem Possible cause Solution
The control light does not light up.
No power connection.
Check if the device is connected to a
functional outlet.
Maybe the outlet is defective, try another
one.
Device does not work.
Overheating (for example, due to a lack
of water) lead to the device being shut
down automatically.
Let the device cool down completely, ll
the water tank and try it again.
No steam comes out.
Nozzle is plugged.
Clean the water tank and the nozzle with
standard cleaning agent, the water tank
should be decalcied if necessary.
Use the device with distilled water.
There is no steam and it makes
strange noises.
Water tank is empty. Let the device cool down and ll the water
tank.
It is dicult to move the cleaning
base over the carpet.
Glider not being used . Always use the carpet glider for carpet
cleaning.
Please contact our customer service if you are unable to repair a disruption. Never open the device!
ATTENTION!
To Next Page
Loading...
