22
Instruction manual
GB
22
CAUTION!
Risk of suocation through plastic foil and bags! Keep children and animals away from packaging material.
Before rst use
Check the set for completeness and any possible transport damage. The scope of delivery from your purchased set can be seen
in the packaging or separate insert. Please contact our customer service if there are any complaints.
Remove the packaging material as well as any labels found on the product that have the purpose of transport protection or
advertising.
Construction/assembly
1. Insert the handle with bar 2 in the corresponding opening on the top of the main device 1 until you can hear it lock (g. A).
2. Plug the cleaning base
4 on the bottom of the main device 1 until you hear it lock (g. B).
3. Place the cleaning base
4 in the center of the microber wipe 5 and press it in place (g. C).
4. Fill and install the water tank
3 as needed.
Operation
Fill water tank
Do not add any descaling agent, aromas, cleaning additives, oils or other chemicals into the water tank.
We recommend using distilled water to avoid deposits.
Do not remove the water tank when the device is connected to the power supply.
ATTENTION!
To Next Page
Loading...
