14
Instruction Manual
GB
4 Nicer Dicer smart – Blade inserts + grating insert
4.1 Assembly
CAUTION!
Risk of cutting injuries!
The blades are extremely sharp. Always hold parts by the plastic and do not touch the blades with your hands or other body
parts under any circumstances.
Store the product out of the reach of children and animals.
Place the cutter base on the collecting container and lock it into place with an
audible click.
Insert the cutter top at an angle of 90° (vertically) to the cutter base in the side slots
provided.
Built-in pin block with automatic cleaning sieve (not removable).
Part cover for blade inserts
Only possibly if the cutter top is in vertical (90°) position.
To remove, put the cutter top in the vertical position and pull upwards while
holding down the cutter base with the other hand.
To Next Page
Loading...
Need help?
General
