7
ENGLISH
CE DECLARATION OF CONFORMITY
Manufacturer: GENIUS S.p.A.
Address: Via Padre Elzi, 32 - 24050 - Grassobbio- Bergamo - ITALY
Declares that: Operator mod. SIMPLE 24V with 230 Vac power supply
• is built to be incorporated in a machine or to be assembled with other machinery to create a machine under the provisions of
Directive 98/37/EC;
• conforms to the essential safety requirements of the other following EEC directives:
73/23/EEC and subsequent amendment 93/68/EEC.
89/336/EEC and subsequent amendment 92/31/EEC and 93/68/EEC
Furthermore, the manufacturer declares that the machinery must not be put into service until the machine into which it will be
incorporated or of which it will become a part has been identified and its conformity to the conditions of Directive 98/37/EC has
been declared.
Grassobbio, 30-06-2007
Managing Director
D. Gianantoni
Notes on reading the instruction
Read this installation manual to the full before you begin installing the product.
The symbol
indicates notes that are important for the safety of persons and for the good condition of the automated system.
The symbol draws your attention to the notes on the characteristics and operation of the product.
INDEX
1. DESCRIPTION OF COMPONENTS page.8
2. TECHNICAL SPECIFICATIONS page.8
3. DIMENSIONS page.8
4. ELECTRIC PREPARATIONS (standard system) page.8
4. INSTALLING THE AUTOMATED SYSTEM page.9
4.1. PRELIMINARY CHECKS page.9
4.2. ON-COLUMN INSTALLATION page.9
4.3. ON-WALL INSTALLATION page.10
4.4. CLOSING DIRECTION page.11
4.5. SECURING THE ROD page.11
5. START-UP page.11
6. MANUAL OPERATION page.12
7. RESTORING NORMAL OPERATION MODE page.12
8. AVAILABLE ACCESSORIES page.12
9. MAINTENANCE page.12
10. REPAIRS page.12
10.1. REPLACEMENT OF FLASHING LAMP page.12
To Next Page
Loading...
