6
Note: If the software installation menu did not appear, open Windows Explore and double-click on the
“Setup. exe” icon in the CD- ROM directory. Click the Utility Driver first to install the digital camera
software. Follow the on-screen instructions to proceed. When you are done installing the digital camera
software, you have the choice to go back to the software installation menu and install the other bundled
software programs.
Using Your Camera
The Genius VideoCAM Smart 300 camera has three different operation modes: Digital camera mode,
PC camera mode, and video camera mode. With these modes, you can use the Genius VideoCAM
Smart 300 to take photos, capture video and show these images in various ways.
The digital camera mode
In the digital camera mode, you can take photos, then view and download them from your camera to
your PC and save them as files.
Taking pictures
Turn on the power of the camera by pressing the Mode button. The camera beeps three times and
enters camera mode. The status of camera will appear on the status display. Press Shutter to take
pictures.
This icon
indicates that the camera is in High resolution mode. You can change it to Low resolution
mode by pressing the Mode button once. The counter indicates the number of photos taken.
Managing Photos in the Camera
Deleting the last photo taken
Press the Delete button and this icon appears in the display status.
Press and hold the Delete button for 1.5 seconds. The last photo taken will be deleted.
To Next Page
Loading...
