11
Enabling the self-timer
The self-timer function lets the camera take pictures 10 seconds after the Shutter is pressed. To enable
the self-timer, press the Mode button until the self-timer icon
appears.
Press the Shutter and the camera will start making a “beeping” sound. After 10 seconds, the camera
will take pictures automatically.
The video camera mode
The video camera mode lets capture motion video and save it as a video file.
Note: Make sure the ArcSoft VideoImpression software is installed. If not, please install it first.
(Refer to the section “
Installing the Digital Camera Software”)
Using the Camera as a Video Camera
Refer to the illustration below to connect the camera to your PC using the USB cable. “PC” will appear
in the display status.
To Next Page
Loading...
