8
Deleting all photos
Press the Delete button and this icon appears in the display status. Hold the button for 1.5
seconds and this icon
blinks on the status display.
Press and hold the Delete button for five seconds. All photos and video files in the camera memory will
be deleted.
Downloading photos from the camera
Refer to the illustration below to connect the camera to the PC using the USB cable.
Turn on your PC if it isn’t on already. Click on the PhotoImpression icon
in the Windows
Desktop, or choose Start > Program Files > ArcSort PhotoImpression 3.0 > PhotoImpression 3.0.
The following PhotoImpression main screen will appear.
Note: Make sure the ArcSoft PhotoImpression software is installed. If not, please install it first.
(Refer to the section “
Installing the Digital Camera Software”)
To Next Page
Loading...
