Chapter III. Usage and Maintenance
Important Notes about Scanning
Negatives
• Make sure the film is properly loaded
into the frame holder and the frame
holder is correctly positioned on the
scanner glass (see above).
• Make sure you adjust the SOURCE in
the TWAIN window to the
appropriate TRANSPARENCY or
NEGATIVE setting (see the TWAIN
section of this manual for more
detailed information about scanner
settings)
• Since photo negatives are almost
always enlarged, make sure you use a
high scanning resolution - at least 600
dpi (see the TWAIN section of this
manual)
• Remember to replace the frame
holders when finished using them.
Attention
To Next Page
Loading...
