GENMAX GM6000iED - DIGITAL DISPLAY CENTER

10
CONTROL FUNCTIONS
DIGITAL DISPLAY CENTER
① HOURS: Represents single run time, goes from 0
at each startup.
② HOURS: Represents total operation time of the
generator. The two factors ① and ② are displayed
alternately every 8 seconds.
③ GASOLINE FUEL METER: Gasoline fuel level
display.
④ VOLTAGE: Voltage display: 120V and 240V switch
every 16 seconds.
⑤ FREQUENCY: Frequency display.
⑥ LOAD: Load power display.
⑦ POWER: Green light means normal operation.
⑧ OVERLOAD: Red light means the machine
overload.
⑨ LOW OIL: Red light means the amount of oil is too
low.