GENMAX GM6000iED - GM6000 iED Startup Procedure

14
STARTING UP THE GENERATOR
Press the LOW IDLE switch to "OFF";
4.
Press the main switch to "ON";
5.
Select the Fuel:
a. Gasoline: Turn the oil/gas switch to gasoline;
b. LPG:
1. Connect the LPG hose to the LPG tank;
2. Tighten the other end of the LPG hose to the generator intake;
3. Turn the fuel source switch to LPG.
3.
1. 2. 3.
GM6000iED Startup Procedure
Remove the load from all output ends;
1.
Connect battery line before first use:
1. Open the oil maintenance cover;
2. Connect the positive and negative electrodes of the battery.
2.