30
08 Frequently Asked Questions
FAQQUESTIONS TYPE
Machine Related
Questions
SOLUTION
How large format can the L8 laser
engraving machine engrave?
What type of laser source is the
machine? What is the laser power?
How does the L8 laser engraving
machine focus?
Is the working platform damaged
during laser engraving?
What will happen if the machine is
powered off during work?
Why can't the pattern be engraved
at all (or the engraving is very
shallow)?
What should I do if the pattern
engraving is incomplete (or the
depth is inconsistent)?
Belongs to semiconductor lasers, the laser power is 20W/40W
levels.
When the power is cut off during the engraving task the laser head
will stay in place. When the power is turned on again, the machine
will be initialized and will not continue to perform the original task.
The imported picture should be clear, and the color should not be
too light; make sure that the focus is normal before engraving and
the power, speed and times are set appropriately.
Please ensure that the object to be carved is flat and that the
machine is level, and that it has been adjusted normally according
to the operating methods in the user manual.
Place the material on the stage, lower the left knob to focus, and
lock it after the focus is completed.
During engraving or cutting, the laser may penetrate the object
and leave marks on the work surface. Be sure to place an object
that the laser cannot penetrate under the engraved object, such
as: stainless steel plate, aluminum alloy plate, etc.
20W 40W
400mm*400mm 390mm*390mm
To Next Page
Loading...
