Need help?Do you have a question about the GENORAY GIX-1 and is the answer not in the manual?
Explains manual structure, notations, warnings, symbols, and contents.
Describes the product, its intended use, user classification, labels, and information security.
General safety guidelines and risk factors to consider during use.
Guidelines for radiation safety and protection during operation.
Important checks and considerations before operating the device.
Specific precautions and best practices during product operation.
Detailed instructions for cleaning and disinfecting the intraoral sensor.
Guidelines for visual inspection and regular maintenance of the product.
Procedures for safely storing the intraoral sensor and its components.
Identifies damage from user negligence, including cover, cable, and connector issues.
Step-by-step guide on how to acquire images using the device.
Countermeasures for issues where image acquisition fails.
Addresses image acquisition failures occurring without X-ray exposure.
Procedure to measure ADC offset and set thresholds when X-ray is off.
Troubleshooting image acquisition failures after adjusting ADC offset.
Detailed technical specifications of the intraoral sensors.
Recommended environmental conditions for optimal operation and storage.
Instructions for calibrating the Port-X II device.
Instructions for calibrating the Port-X III device.
Calibration instructions for Port-X IV, IVe, ZEN-PX4, ZEN-PX4e.
Guidance for calibrating other compatible portable equipment.
General| Type | Digital Radiography System |
|---|---|
| Application | General Radiography |
| Image Matrix | 3072 x 3072 |
| Dynamic Range | 16-bit |
| Focal Spot Size | 0.6 / 1.2 mm |
| Anode Heat Capacity | 300 kHU |
| Workstation | Included |
| Detector Size | 17" x 17" |
| X-ray Tube Voltage | 40 - 150 kVp |
| Generator Type | High Frequency |
To Next Page
