EasyManua.ls Logo

Genquip Gi3300ER - Pre-Operation Checklist

Genquip Gi3300ER
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GENQUIP GI3300ER DSP INVERTER GENERATOR PAGE 5
page 5Genquip Gi3300 DSP Inverter Generator
Pre-Operation Checklist
Note: Pre-operation checks should be carried out each time the generator is used.
Fuel System
Make sure there is sufficient fuel in the tank. The engine uses regular unleaded petrol
only. The fuel tank capacity is 7 litres.
Refuelling & Fuel Level Gauge
To refuel, remove cap and fuel slowly until fuel gauge indicates full. Apply fuel cap.
WARNING: Fuel is high flammable and poisonous.
DO NOT fill above the top of fuel filler or it may
overflow when the fuel heats up and expands.
Wipe up any spilled fuel immediately.
After refuelling, make sure the tank cap is tightened.
Engine Oil
Make sure the engine oil is at the upper level of the oil filler hole. Add oil as necessary.
Recommended oil for most climates is 10W30. Engine oil quantity is 600 millilitres.
Fuel Cap
Fuel Level Gauge
“F” Full
“E” Empty