Genquip Gi3300ER - Remote Start;Stop Function

PAGE 8 GENQUIP GI3300ER DSP INVERTER GENERATOR
Remote Start/Stop Function
1. Turn the fuel
knob to “On”.
2. Turn the
engine switch
to “On”.
3. To start the engine remotely,
push unlock button on the
remote. If the first attempt fails,
push the unlock button again.
4. To shut off the generator, push
the lock button on the remote.
5. If the generator will not be
used again for more than a
day, turn the engine switch to
the “Off” position.
Failure to turn the engine
switch off after use will drain
the battery.