06 / 07
1. Check that the front and rear brakes are properly
aligned. Squeeze the front brake lever (left) and the rear
brake lever (right) with your e-bike at a standstill and
apply full pressure to one pedal. The e-bike should not
move forward if the brake levers work properly.
2. Check that the insertion marks on the handle stem and on
the seat post are fully tightened.
3. Check the front and rear wheels to ensure that they are
secure. Ensure that the hub nuts on the front and rear
wheels are securely fastened.
4. Check tire pressure (found on the tireʼs sidewall).
5. Ensure that pushing the seat from side-to-side securely
fastens the seat.
6. Check the pedals and the gear crank to ensure that they
are secure.
7. Check that side reflectors are in place and free from
damage and contamination.
8. Check the frame and the front fork for any deformation.
9. Ensure that the front wheel and the handlebars are set in
the correct orientation.
10. Secure any loose fitting pants to your leg with a band or
other similar means.
11.For your safety, always wear protective clothing (helmet,
biking gloves) each time you ride your e-bike.
12. If a child intends to use your e-bike, make sure that he/she
wears protective clothing (including a helmet, knee pads,
elbow pads, and/or wrist protection). Check your state
regulations to determine the minimum age requirement for
e-bike use in your area.
• In this manual, there are three signs used to alert you of the
degree of danger associated with riding: Danger, Warning,
and Caution.
Danger
Warning
Caution
Indicates an imminently hazardous situation
which is liable to result in death or serious
personal injury.
Indicates a potentially hazardous situation
which could could result in death or serious
personal injury.
Indicates a potentially hazardous situation
which may result in minor or moderate person-
al injury.
3. Pre-Ride Checklist
To Next Page
Loading...
