8. The display will light up (see DISPLAY) and the air fry button ( ) will ash as the
default selected program.
9. The display will alternate between showing the default air fry temperature and the
program run time. You can change either of these settings (see PROGRAM GUIDE).
10. Change the settings as desired or accept the defaults. Tap the power button ( ) to
start the program.
11. Once the program has nished, the display will go out (except the power button)
and the fan will operate for 20 seconds. After 20 seconds, your Cyclo Chef Multi Air
Cooker will beep 5 times and then switch off.
Removing the basket
1. Open the lid. Beware of any escaping steam and hot air.
2. Use the two handles to remove the basket. We recommend using oven gloves
because the basket and surrounding areas will be HOT.
3. Press the basket away from you (towards the rear of the unit) then lift the end of the
basket that is nearest to you slightly upwards until it clears the rim of the bowl.
4. Using handles, lift the basket clear of the bowl and place it down onto a heat resistant
surface.
5. Carefully remove the basket lid and tip out the contents.
RACK
Before use, unfold and secure the legs of the rack as shown (g. E). The supplied rack can
be placed in the high position (g. F) moving the food nearer to the heating element, or the
low position (g. G) moving the food further from the heating element. The legs of the rack
can be folded for storage.
To Next Page
Loading...
Need help?
General
