EasyManuals Logo

Geotab GO7 User Manual

Geotab GO7
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Geotab, Inc. | www.geotab.com | T: (877) 436-8221 | Copyright 2012 – All Rights Reserved | Rev0.2 - 04/2013
2
Technical Specifications and Features
Compliance RoHS compliant, lead free
Size 75 mm (L) x 50 mm (W) x 23 mm (H)
Weight 70 g (0.15 lb)
Housing Flame retardant black ABS
Environmental Tests
Operating Temperature: -30 to +70 °C
32 Mb Non-volatile Flash Memory
Store
Main Data Memory: Records 4,650 miles (7,500 km) of city
driving (40,000 logs).
Accident Data Memory: Buffer records over 100 minutes of
second-by-second data (6,000 logs). Last 72 records (1.2
minutes) are sent instantly on accelerometer triggered
accident-level events.
Engine Management
Diagnostics supported on:
CAN: ISO 15765
Diesel Engines: SAE J1939 & J1708
Legacy OBD: SAE J1850 PWM/VPW, ISO 9141-2, and ISO
14230 KWP2000.
On-Board Single Wire CAN (GM J2411)
CCD bus (Chrysler)
Medium Speed CAN (Ford)
Variable Input Output Module (non-standard)
Adapter packs available for heavy duty vehicles.
Operating Voltage 8 V to 36 V
Current
Operating Mode: 120 mA
Sleep Mode: 2.7 mA.
Internal current draw measurement
Resettable over-current protection to I/O expanders (IOX)
Recording Parameters
Patented, curve-based GPS/voltage/accelerometer/ engine data
logging algorithm for fewer, more accurate data points.
I/O Expandability Support (IOX™)
Driver ID
Garmin
Iridium
Auxiliary
Hours of Service (HOS)
Serial Port for 3
rd
party device integration
And more!
Over The Air (OTA) Support
Firmware Updates: For maintenance, new features, and
custom-applications
Parameters: For turning additional features on/off
Almanac/Ephemeris Data: For quicker GPS latch
In-cab Buzzer
Driver Feedback: Harsh braking, harsh acceleration, harsh
corners, over-revving, excessive idling and speeding, engine
based seatbelt violations (when available), and custom.
Test Mode: Diagnostic beeps for system of GPS and wireless
connection.
Clock
Internal clock is set by initial GPS latch and counts seconds for
time based activity during sleep mode including heartbeat and
voltage recording.

Other manuals for Geotab GO7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Geotab GO7 and is the answer not in the manual?

Geotab GO7 Specifications

General IconGeneral
BrandGeotab
ModelGO7
CategoryMeasuring Instruments
LanguageEnglish