GeoVision GV-EBL2111 User Manual

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
IC-QG-AS-EN
Quick Start Guide
GV-IP Camera

GeoVision GV-EBL2111 Specifications

General

Camera Type	Bullet
Image Resolution	1920 x 1080
Lens Type	Fixed
Wide Dynamic Range	Yes
IR LED	Yes
ONVIF	Yes
Minimum Illumination	0 Lux (B/W, IR on)
Frame Rate	30 fps at 1920 x 1080
Day/Night	Yes (with IR-cut filter)
IR Distance	30m
Video Compression	H.264, MJPEG
Ethernet	10/100 Ethernet
Protocols	TCP, UDP, HTTP, HTTPS, SMTP, FTP, DHCP, NTP, DDNS, RTP, RTSP, RTCP, PPPoE, UPnP
Power Supply	DC 12V, PoE (802.3af)

Summary

IR Arctic Box Camera

Bullet Camera (Part I)

Installation

Provides comprehensive guidance on installing the Bullet Camera, including angles and lens adjustment.

Bullet Camera (Part III)

Ultra Bullet Camera

Target Bullet Camera (Part I)

Target Bullet Camera (Part II)

Vandal Proof IP Dome (Part I)

Vandal Proof IP Dome (Part II)

Vandal Proof IP Dome (Part III)

Target Vandal Proof IP Dome

Fixed IP Dome

Target Fixed IP Dome

Cube Camera

Advanced Cube Camera

PT Camera

Pinhole Camera

Accessing the Camera

System Requirement

Specifies system requirements for accessing the GV-IP Camera via Web browser.

Accessing the Live View

Guides on accessing the camera's live view, including IP address configuration.

Adjusting Image Clarity

The Web Interface

Live View

Upgrading System Firmware

Restoring to Default Settings

Using the Web Interface

Directly on the Camera